Check out our new range of eSUN Resins and filaments here at 3D Filaprint.

Get In Touch

Fill in your details below and click 'Submit'

3D FilaPrint ASA X Iron Grey 1.75mm 3D Printer Filament

Product Code: FASAX-IGRY-1.75-1Kg
  • Filament Brand: 3D FilaPrint
  • Filament Type: ASA
  • Filament Colour: Iron Grey
  • RAL Colour: 7011
  • Filament Diameter: 1.75mm
  • Filament Weight: 1Kg
  • Filament Length: Approx 325 Metres
A modified, easy to print quality ASA filament, great for outdoor use, due to its UV and high impact resistance.

Choose options

£31.14 Inc Vat
£25.95 Exc Vat


  • Availability: In Stock
  • You will earn 31 loyalty points with this purchase worth £0.31 that you can use on this order.

    More Details

    ASA X is a modified ASA (Acrylic Styrene Acrylonitrile) 3D Desktop printing filament.

    ASA X has been developed specifically for outdoor use.  The benefits of using ASA have always been its high impact and high temperature resistance, coupled with its UV resistance properties.  Now with ASA X you have all these great qualities in a formula that is easier to print, available in several standard colours and at a very reasonable price.

    The test sample you can see in the product photo was printed on the open style e3D Big Box 3D printer which is a semi enclosed unit.  The printing temperature was at 235c and the platform was heated to 80c, with a very fine layer of Printafix adhesion spray.

    There was very little "tweaking" of the standard "ABS" settings when using our Simplify 3D slicing software.  Which is a plus, because of the historical issues sometimes found when printing with regular ASA filament.  There was also very minimum warping (if any that was visible on this test print) which was sometimes a past characteristic when printing with ASA filament.  Another plus of ASA X is the issues with "cooling" with users having to change setting during prints to ease up or speed up cooling.  With the new ASA X this is no longer and issue.  No fan 1st layer, 60% fan after, good to go.  Though this may be model dependent.

    Although there is a very low odour to the FilaPrint ASA X, and it does smell semi sweet, you should as with all 3D printing materials undertake your printing in a well ventilated, spacious environment, more so when printing with materials like ASA, ABS, HIPS, Vinyl etc.

    ASA material has been around for some time, we read somewhere it was developed by BASF, though now is the perfect time to introduce a 3D printing filament, which is perfect for outdoor use to your own 3D printing toolbox.

    This 1Kg spool is packaged in a sealed clear cellophane, then sealed again inside a cardboard box.  We also provide a re-sealable bag to use once the spool has been opened.  As it is always best practice to keep all your filaments dry and away from excessive moisture, some more than others.  You do however have the choice NOT to receive one of our bags if you have enough of them already!  Just make that choice during the product selection.

    The price you see is the price you pay, postage has already been included!

    Summary of information:

    • UV Resistant - Great for outdoor use
    • Impact & Heat resistant
    • Low odour
    • Easy to print
    • Superb bonding between layers
    • Excellent surface finish
    • Great solid colours
    Diameter Tolerance Roundness
    1.75mm ± 0,05mm >95%
    Characteristics Test Method Typical Value
    Specific Gravity ISO 1183 1,11 g/cc
    MFR 210°C/2,16 kg ISO 1133 26.6 gr/10 min
    Tensile strength at yield (MPa) ISO 527 47,5 Mpa
    Strain at yield ISO 527 2,1%
    Tensile-modulus ISO 527 2020 Mpa
    Impact Strength 18 KJ/m²
    Printing Characteristics Test Method Typical Value
    Printing temperature 245±10˚C

    Looking for a new type of 3D printing surface that requires very little maintenance and will last for months, if not years, then try the amazing PrintBite.

    Adrian Sippitt -
    5 Stars

    Great value

    Good price for a big spool, prints very similarly to the ABS-X which is to say very well! Have done two long (13hr+) prints with no issues and warping is minimal.

    Seems just as good as the ABS-X but with the added bonus of being more UV resistant for outside use.