Call Us Today (01702) 611027 9am - 5:30pm
Quick & Friendly Customer Service
Fast & Free Delivery
Order (B4 3PM) Receive Next Day, Mon - Fri UK

Taulman 3D filaments

Alloy 910 HDT Black 1.75mm 1lbs 3D Printer Filament

Alloy 910 HDT Black 1.75mm 1lbs 3D Printer Filament

£29.50 £35.40 (inc. VAT)
Stock Status: In Stock
Alloy 910 HDT Black by taulman 3D, the Schwarzenegger of the filament world! This material is strong, very strong @ 8,100 PSI Tensile Strength. A pure filament with natural strength, no additives or modifiers. Has the same wonderful printing characteristics as taulmans other fine filament range. Now even more heat resistant.
You Will Earn 35 points with this purchase


10% Discount off the PolyBox™ when you purchase this item. (Keep your filament moisture free even when 3D printing).

Alloy 910 Black is a measurable advancement in 3D Printing materials technology from taulman3D.  taulman Alloy 910 3D Printer Filament is the combined effort of chemical companies, extrusion manufactures and taulman3D to specifically develop a single material to meet as many high performance 3D Printing needs as possible.  With a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals our t-glase, a vast range of chemical resistance.

Always dry this filament first, prior to printing, even when brand new - 7 hours at 70c works well. Make sure you reseal the filament after use in the bag provided, as you would with most nylon based materials, the results are amazing.

You can also anneal (heat treat) this material after you have 3D printed your object.  Instructions are at the bottom of this product page.




Alloy 910 HDT continues the features above but with a higher HDT for even higher temperature requirements.
  • Specifications:
  • Tensile Strength = 8,100PSI
  • Modulus PSI = 72,932
  • Max Elongation at break = 31%
  • Print Temperature = 285C - 300C
  • Nozzle size = Any - There are no particulates or additives in Alloy 910
  • HDT = 112C and > 150C when annealed
  • Print Bed = Cold = BuildTak/Lokbuild with coat of gluestic - Hot = Glass heated to 55C with coat of PVA (PVA is 50% water  and 50% "Elmers Glue All")
Shrinkage = 0.0033in/in

Uses such as direct mounting to auto motors or diesel motors for ports.
 
taulman 3D suggested printer settings!   
  • Filament Brand:
    taulman 3D
  • Filament Type:
    Nylon
  • Filament Colour:
    Black
  • Filament Diameter:
    1.75mm
  • Filament Weight:
    1Lbs
  • Brand:
    taulman 3D
  • Condition:
    New
  • Product Code:
    tau-910HDT-BLK-1.75mm
  • Weight:
    0.45kg
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product