The Industrial Grade Filament
Designed and manufactured by one of the leading companies in the development of TPU 3D printing filaments. NinjaTek™ the 3D printing business of Fenner Drives located in the USA, have engineered a filament that has an impact strength 86% greater than ABS, with high abrasion resistance.
Armadillo filament is a high performing rigid material, providing 90% higher abrasion resistance than nylon materials. Its toughness ratings are superior to commonly used materials, 86 times greater than that of ABS. It is an excellent material to use for bridging, with virtually no warping issues.
When you need a rigid product that can withstand wear and tear, the Armadillo resistance to fracturing makes it a perfect replacement.
Suggested Applications: braces, fasteners, gears and protective covers.
Shore hardness scale courtesy of wikipedia.
3D Printed Star Wheel Corrects Belt Seating IssueDave Winters, a process engineer at Fenner Drives, needed to correctly seat a power transmission belt on an idle gear for trimming. The current steel wheel had teeth that were - Read More
Save The Life of Your Favorite Pliers with 3D Printed Protective Grippers
3D Printed Replacement Washers for Gymnastics Equipment
Cody Umberger, Vice-President of North Star Gymnastics in Boonton New Jersey, is a fellow 3D printing enthusiast who is always eager to share his concepts with the NinjaTek team. Cody’s - Read More »
University Team Engineers 3D Printed Fingers for Prosthetic Hand
Kyung Yun Choi and his team at the University of Illinois Urbana-Champaign engineered a durable, high-impact resistant prosthetic hand, using FDM printing to reduce development time and cost. Choi’s team - Read More »
3D Printed GoPro Camera Case Protects Drone During Crash
Chuck Durham’s Flynoceros Orion drone frequently takes flights as high as 150 feet and as fast as 70 miles per hour. To capture the view from the sky, a GoPro - Read More »
- ► Shore Hardness = 75D
- ► Excellent bridging capabilities and virtually no warping
- ► Abrasion resistance 84% better than PLA and 60% better than ABS
- ► Industry leading toughness and durability to ensure longevity in printed parts
- ► Chemical resistance to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
- ► Consistent diameter and material properties providing reliable, high quality prints
Extruder Temperature: 220°C – 230°C
Platform Temperature: Room temperature – 40°C - Cold platforms can be used
PrintaFix, blue painters tape, printbite or lokbuild is suggested if not using a heated bed.
Top and bottom layers: 15-20 mm/ sec (900-1800 mm/ min)
Infill speeds: 45-60 mm/ sec (2700-3600 mm/ min)
Layer 2+ use cooling fan if available.
No reviews have been left for this product, be the first to leave a review