@Kodama3D Tree, photo kindly provided by @idevelop3d
Please note actual colour of brown may vary slightly per spool.
Proto-pasta's Fresh Cut Aromatic Pine PLA is based on our easy printing, high quality PLA. This seemingly odorless plastic releases an invigorating pine scent when heated. Beyond this novel feature, it has a unique translucence with a beautiful wood fleck. Aromatic Pine PLA, made with the highest quality dry, finely ground Balsam Fir needles, prints like standard PLA.
If you are new to exotic filaments, the team at Proto-Pasta have some great tips for you. Plus some answers to frequently asked questions, both definitely worth a read.
- Available in 1.75 & 2.85 (3) mm diameter
- Usable on most PLA-compatible printers, such as Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!
- Kit includes 500g 8" diameter spool & festive laser cut ornament
- Limited quantities
No abrasive fillers so expect normal wear with standard nozzles.
In our experience, good results were achieved using standard PLA parameters with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required.
Special considerations when printing HTPLA - Depending on your hardware, HTPLA can heat treat inside your hotend, creating a bulb that restricts extrusion. This bulb can be mechanically removed or overcome with higher-than-standard nozzle temperatures. Consider our blog for more on avoiding jamming.
You can read a thorough review of the Proto-Pasta Aromatic Pine PLA by Ian Hiscock by clicking the PDF icon below.