Get In Touch

Fill in your details below and click 'Submit'

CarbonX CF Ultem Black 1.75mm 3D Printing Filament

CarbonX CF Ultem Black 1.75mm 3D Printing Filament

Product Code: 3DXTECH-CFULTEM-250-1.75mm
  • Filament Brand: 3DXTech
  • Filament Type: CF ULTEM
  • Filament Colour: Black
  • Filament Diameter: 1.75mm
  • Filament Weight: 250gms
CarbonX™ CF-ULTEM 3D Printing Filament is inherently flame retardant, has exceptional dimension stability and will find many uses in the electronic and automotive industries.
£91.20 Inc Vat
£76.00 Exc Vat

Quantity

  • Availability: In Stock
  • You will earn 91 loyalty points with this purchase worth £0.91 that you can use on this order.

    More Details




     

    CarbonX™ CF-ULTEM 3D Printing Filament

    CarbonX™ Carbon Fiber Reinforced PEI (Polyether Imide) is manufactured using a custom-formulated compound made from ULTEM™ PEI resin and high-modulus carbon fiber.  PEI is an amorphous, high-performance polymer that offers excellent mechanical, thermal, and chemical resistance properties.  Our PEI based filaments offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217°C.  The addition of high-modulus carbon fiber greatly increases the stiffness / modulus of the material as well as greatly improving dimensional stability during and after printing.

    Product attributes include:

    • High thermal properties: (Tg) of 217°C
    • Inherently flame retardant
    • Long-term hydrolytic stability 
    • Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
    • Exceptional strength and modulus, even at elevated temperatures
    • Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
    • Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies

    Automotive / Transportation Applications:  ULTEM™ resins provide automotive manufacturers with a high performance, chemically resistant, thermally-stable, cost-effective alternative to metal that is strong enough to replace steel in some applications and light enough to replace aluminum in others. For applications like transmission components, throttle bodies, ignition components, sensors and thermostat housings, 

    Electrical / Electronics Applications:  ULTEM™ resin may be an excellent material choice for today’s demanding electrical applications, including connectors, MCB components like housings, shafts and levers, hard disk drive internals, FOUP’s, BiTS, PCB’s, MCCB internals, Plenum devices, LCD projector internals, fuel cell components and many other applications. 

    Filament Specifications:

    • Diameter:  1.75mm (+/- 0.05mm)
    • Color:  Black 

    Recommended Print Conditions:

    • Extruder Temp: 360 - 390°C (all-metal extruder)
    • Bed Temp: 140 - 160°C
    • Bed Prep: PEI tape, Polyimide Tape, Lightly sanded FR4 or Perf board.
    • Nozzle: We strongly recommend a 0.4mm orifice or larger and hardened steel nozzles.
    • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and grinding a notch into the filament.