Get In Touch
Fill in your details below and click 'Submit'
Fill in your details below and click 'Submit'
5 - Read Reviews
Black Premium PLA! Low warp, easy to print. 1 Kilo of premium 3D Printer Filament, amazing value for money.
This 1kg of filament spool (500gms spools also available) is shrink wrapped, boxed and shrink wrapped yet again! Ensuring that it arrives with you moisture free and ready to print.
Fantastic layer bonding, low temperature printing, (see 3D Benchy print sample in photo) no heated platform neccessary, lays down beautifully on the majority of FFF/FDM 3D printer platform surfaces.
Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.
Features:
Diameter
Tolerance
Roundness
1.75mm
± 0,05mm
>95%
Characteristics
Test Method
Typical Value
Specific Gravity
ASTM D1505
1,24 g/cc
MFI
6,0 g/10 min
Tensile Strength
ASTM D882
110 MPa (MD)
145 MPa (TD)
Elongation at break
ASTM D882
160 MPa (MD)
100 MPa (TD)
Tensile Modulus
ASTM D882
3310 MPa (MD)
3860 MPa (TD)
Impact Strength
7,5 KJ/m²
Printing Characteristics
Test Method
Typical Value
Printing temperature
180-210ºc
Melting temperature
210±10ºc
Melting point
ASTM D3418
145-160ºc
Looking for a new type of 3D printing surface that requires very little maintenance and will last for months, if not years!, then try the amazing PrintBite.
This PLA is one of the best for price that I have used so far in my printing experience, I am half way through the spool with no problems.
Im getting less artifacts with this PLA than more some of the more expensive Filiments.
Its a great product to try when ur first starting out.
This material prints straight from the spool!.
Highly recommended as your first filament. Using standard PLA print settings will give excellent results and with no temperature related issues such as warp and delamination, its an easy material to start with.
Its rough surface finish and ability to un-spring from the spool needs to be managed so it doesn't get itself tangled up though.
Summary: A great first material if you're getting to grips with 3D printing for the first time. Good for getting a new printer bedded in or when you don't want to fight with ABS.
Good for large components with little or no temperature related issues such as warping. Obviously not good for high temperature parts, but a nice filament nonetheless.
I only knocked the one star off due to its rough surface and ability to tangle up on occasions.
