Buy your PEEK, PEKK-A, Ultem 1010 and other engineering materials here at 3D Filaprint.

Get In Touch

Fill in your details below and click 'Submit'

FilaPrint Natural Green Wood PLA 1.75mm

Product Code: FILA-GRWOOD-1.75mm
  • Filament Brand: FilaPrint
  • Filament Type: PLA
  • Filament Colour: Green
  • Filament Diameter: 1.75mm
  • Filament Weight: 500gms
Not only does the FilaPrint Natural wood range look like wood it positively smells like wood when 3D printing even when cooled.
£32.28 Inc Vat
£26.90 Exc Vat


  • Availability: In Stock
  • You will earn 32 loyalty points with this purchase worth £0.32 that you can use on this order.

    More Details

    “Natural looking wood filaments”.

    Not only does the FilaPrint Natural wood range look like wood, it positively smells like wood when 3D printing and even when cooled!

    The FilaPrint Natural Wood filament prints wonderfully from 205c – 230c, at PLA settings, though we do recommend using a 0.5mm or larger nozzle.  The test print vases that you see in the photos were printed on a Mini Kossel (Delta Style 3D Printer) at 205/210c hot end temp, with a platform temperature of 50c (though this could have been lowered).  It will also print on the majority if not all 3D printer platforms.  The actual printing speed for the vase prints was 50mm/sec, this was due to the wider nozzle being used.  See additional info below, for other print speeds and temperatures.

    What we also love about this filament is the layer bonding, even though the vase prints were at a resolution of just 0.2mm you cannot see any discernible layer lines.  It looks truly wonderful.

    In addition, when printing with a larger nozzle you can find that it will print quicker as you can up the pace a little bit! It oozes like a piece of sting rather than a line of cotton 😊

    It is also advised that when you finish a print with your wood filament and printing has stopped for the day, you should purge out your hot end, using some standard PLA filament, just to ensure that any wood residue is removed from the head and chamber, extruding several centimetres of PLA should be sufficient to clear it.

    Features and benefits;

    • Will print on majority of surfaces
    • Superb layer adhesion and bonding
    • Has the look and feel of natural wood.
    • Very low warp (if at all, no sign on our test prints)
    • Biodegradable – Wood and PLA mix

    Additional info;

    As the FilaPrint Natural Wood range of filaments has very low warp (if at all) it can be printed onto a non-heated platform. Though If you have a heated bed the recommended temperature is ± 35-60˚C.

    We also advise a nozzle ≥ 0,5mm. The FilaPrint Natural can be printed up to temperatures ~210°C @35-45mms, The FilaPrint Natural Light wood can be printed at higher temperatures up to ~215°C maximum @35-45mms.

    Storage: Cool and dry (15-25˚C) and away from UV light, this will enhance the shelf life significantly.


    Test method

    Typical value

    Printing temp.



    melting temp.


    150˚C ± 10˚C

    Melting point

    ASTM D3418


    vicat softening temp.

    ISO 306

    ± 45˚C


    Test method

    Typical value

    Specific gravity

    ASTM D1505

    1,20 g/cc


    5,0 gr/10 min

    Tensile strength

    ASTM D882

    70 MPa (MD)
    100 MPa (TD)

    Elongation at break

    ASTM D882

    170% (MD)
    110% (TD)

    Tensile modulus

    ASTM D882

    1900 MPa (MD)
    2300 Mpa (TD)

    Impact strength

    7,0 KJ/m²


    ø tolerance



    ø 0,05mm



    ø 0,10mm