Call Us Today (01702) 611027 9am - 5:30pm
Quick & Friendly Customer Service
Fast & Free Delivery
Order 2 spools B4 3PM Receive Next Day, Mon - Fri UK (Exc weekends)

3D Filaprint Natural Wood Range

FilaPrint Natural Off White Wood PLA 2.85mm

FilaPrint Natural Off White Wood PLA 2.85mm

£26.90 £32.28 (inc. VAT)
Stock Status: In Stock
Not only does the FilaPrint Natural wood range look like wood it positively smells like wood when 3D printing even when cooled.
You Will Earn 32 points with this purchase

Make 6 weekly payments of £5.38.

Interest free. Learn More

PayPal Checkout

“Natural looking wood filaments”.

Not only does the FilaPrint Natural wood range look like wood, it positively smells like wood when 3D printing and even when cooled!

The FilaPrint Natural Wood filament prints wonderfully from 205c – 230c, at PLA settings, though we do recommend using a 0.5mm or larger nozzle.  The test print vases that you see in the photos were printed on a Mini Kossel (Delta Style 3D Printer) at 205/210c hot end temp, with a platform temperature of 50c (though this could have been lowered).  It will also print on the majority if not all 3D printer platforms.  The actual printing speed for the vase prints was 50mm/sec, this was due to the wider nozzle being used.  See additional info below, for other print speeds and temperatures.

What we also love about this filament is the layer bonding, even though the vase prints were at a resolution of just 0.2mm you cannot see any discernible layer lines.  It looks truly wonderful.

In addition, when printing with a larger nozzle you can find that it will print quicker as you can up the pace a little bit! It oozes like a piece of sting rather than a line of cotton 😊

It is also advised that when you finish a print with your wood filament and printing has stopped for the day, you should purge out your hot end, using some standard PLA filament, just to ensure that any wood residue is removed from the head and chamber, extruding several centimetres of PLA should be sufficient to clear it.

Features and benefits;

  • Will print on majority of surfaces
  • Superb layer adhesion and bonding
  • Has the look and feel of natural wood.
  • Very low warp (if at all, no sign on our test prints)
  • Biodegradable – Wood and PLA mix

Additional info;

As the FilaPrint Natural Wood range of filaments has very low warp (if at all) it can be printed onto a non-heated platform. Though If you have a heated bed the recommended temperature is ± 35-60˚C.

We also advise a nozzle ≥ 0,5mm. The FilaPrint Natural can be printed up to temperatures ~210°C @35-45mms, The FilaPrint Natural Light wood can be printed at higher temperatures up to ~215°C maximum @35-45mms.

Storage: Cool and dry (15-25˚C) and away from UV light, this will enhance the shelf life significantly.


Test method

Typical value

Printing temp.



melting temp.


150˚C ± 10˚C

Melting point

ASTM D3418


vicat softening temp.

ISO 306

± 45˚C


Test method

Typical value

Specific gravity

ASTM D1505

1,20 g/cc


5,0 gr/10 min

Tensile strength


70 MPa (MD)
100 MPa (TD)

Elongation at break


170% (MD)
110% (TD)

Tensile modulus


1900 MPa (MD)
2300 Mpa (TD)

Impact strength

7,0 KJ/m²


ø tolerance



ø 0,05mm



ø 0,10mm


  • Filament Brand:
  • Filament Type:
  • Filament Colour:
    Off White
  • Filament Diameter:
  • Filament Weight:
  • Brand:
    FilaPrint Natural Wood
  • Condition:
  • Product Code:
  • Weight:
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review