Get In Touch
Fill in your details below and click 'Submit'
Fill in your details below and click 'Submit'
Manufactured in the Netherlands.
Printed product photo - Stackable Box V4 by Yuan4114 - www.thingiverse.com/thing:647425
PET/PETT is a clear plastic resin, it is the most common plastics in the world today, used in the manufacture of water bottles, food container packaging etc.
FilaPrint PET-G poly(ethylene terephthalate) - is glycol modified PET (a polymer resin of the polyester family) filament which we are certain will be the 3D printing filament you are looking for. If you do not wish to print with ABS and need a filament that is both strong, impact resistant and durable, even for the most demanding applications, then FilaPrint PET-G is the material for you, your printer and your customers!
We know over the years that several PET/PETT products can be difficult to work with or take time getting the settings right, which to be honest when you are printing with different materials and you have several projects on the go you don't really have the time to spare "dialling" in different filaments. Other than changing the temperatures slightly on the several machines we pre-tested FilaPrint PET-G on, such as the Big Box, Poetry 2 Infinity, Flexion Graded Wanhau Duplicator 4, Modified Makerbot Replicator 2X and even on the £99 printer Startt (though we used a little PrintaFix to hold it down on the Startt platform), there was little else to "set up" for this filament.
We found that ensuring the external fan was on after the 1st layer and not blowing too fierce to cool down the filament between layers and allow for its superb bonding properties, all we had to do then was enjoy the 3D printing experience!
With the benefits of odour neutral, almost no “warping” (if any), food contact acceptable and being hydrophobic (does not absorb water), you can be confident in this filament for your 3D printing projects.
FilaPrint PET-G filament is perfect for bridging and overhangs, ensuring that your detailed prints remain just that! You can also see from the photographs above that the colours are really vivid, even the translucent filaments have an amazing colour tone.
We have a wide range of colours both translucent and opaque for you to choose from in 1.75mm & 2.85 filament diameter.
This 1kg of filament spool (approx 325 metres) is shrink wrapped, boxed and shrink wrapped again. Ensuring that it arrives with you moisture free and ready to print. Superb tolerances with a smooth finish, a perfect compliment to your 3D printer. The superb price offered already includes UK delivery.
In addition to the great price offered for this filament, when you purchase any two spools from our webstore on a single order you will receive them on our next day delivery service Monday to Friday, though only within the UK.
Summary:
Diameter
Tolerance
Roundness
1.75mm
± 0,05mm
>95%
Characteristics
Test Method
Typical Value
Specific Gravity
ASTM D792
1,1 g/cc
Mold shrinkage
ASTM D955
0,2-0,5%
Tensile strength@yield
ASTM D638
50 Mpa
Elongation at break
ASTM D638
120%
Flexural modulus
ASTM D790
2150 MPa
Impact Strength
Izod Notched 23˚CASTM D256
85 J/m
Rockwell Hardness
ASTM D785
105
Moisture absorption
ASTM D570
0,13%
Printing Characteristics
Test Method
Typical Value
Printing temperature
Actual Printed between 195-220ºc
195-220˚C
Heat Distortion Temperature
ASTM D648
70˚C
Vicat softenening temperature
ASTM D1003
90%
