PLA MATT is an easy to print variant on the everyday material PLA and exists for >70% out of recycled Post-Industrial PLA. Its surface diffuses light to give it a matt look and creates a rough feeling. PLA matte is slightly abrasive, please consider using a hardened nozzle. This material can be printed on most common printers and has a reliable bed adhesion to most common build plate materials.
“Birdhouse 16eme” Designed by FLOWALISTIK
Please note this material is definitely more brittle than your regular PLA filament, so make sure there are no sharp filament feeding angles from the spool to the nozzle. Get that right and you will adore this filament!
There are times when you may require a quality filament that has very low light refraction. Even though we love all our wonderful quality PLA filaments, we have sometimes required a filament which had a plain matte finish, making it look less like plastic!
With this new filament offering we are able to provide you with a filament that is very easy to print even on a cold bed, has superb layer adhesion and a semi textured finish. It does not reflect light and has a finish that is perfect for some architectural and mechanical pieces.
Great for model building, it also has excellent flexural strength for a PLA material, which means in can take a knock or two. Layers lines are almost invisible (even when printing at 0.2mm layer height with a standard 0.4mm nozzle).
This 2.3kg of filament spool is shrink wrapped. Ensuring that it arrives with you moisture free and ready to print.
Fantastic layer bonding, low temperature printing, no heated platform necessary, lays down beautifully on the majority of FFF/FDM 3D printer platform surfaces.
Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.
- Tougher and less brittle compared to regular PLA
- Improved printing speeds
- No "warping" - can be printed on a cold platform
- Limited odour
- Easy to print slightly textured surface
|MFR 210°C/2,16 kg
||14,0 g/10 min
|Tensile strength at yield (MPa)
|Strain at yield
Looking for a new type of 3D printing surface that requires very little maintenance and will last for months, if not years!, then try the amazing PrintBite.
No reviews have been left for this product, be the first to leave a review