Fill in your details below and click 'Submit'
“Birdhouse 16eme” Designed by FLOWALISTIK
There are times when you may require a quality filament that has very low light refraction. Even though we love all our wonderful quality PLA filaments, we have sometimes required a filament which had a plain matte finish, making it look less like plastic!
With this new filament offering we are able to provide you with a filament that is very easy to print even on a cold bed, has superb layer adhesion and a semi textured finish. It does not reflect light and has a finish that is perfect for some architectural and mechanical pieces.
Great for model building, it also has excellent flexural strength for a PLA material, which means in can take a knock or two. Layers lines are almost invisible (even when printing at 0.2mm layer height with a standard 0.4mm nozzle).
This 1kg of filament spool is shrink wrapped, boxed and shrink wrapped yet again! Ensuring that it arrives with you moisture free and ready to print.
Fantastic layer bonding, low temperature printing, no heated platform necessary, lays down beautifully on the majority of FFF/FDM 3D printer platform surfaces.
Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.
MFR 210°C/2,16 kg
14,0 g/10 min
Tensile strength at yield (MPa)
Strain at yield
Looking for a new type of 3D printing surface that requires very little maintenance and will last for months, if not years!, then try the amazing PrintBite.
Probably because of my relative inexperience at 3D printing, I had some trouble settling on the correct profile for this filament and my printer. I think I was changing too many things in too big a step thereby overshooting my eventual settings.
I eventually settled on 222 1st layer and 215C print with 53C bed. This seemed to be almost it other than some signs of under extrusion on the first layer. I increased the Extrusion Multiplier to 1.01 which fixed this.
There is absolutely no stringing and perfect printing at these settings on my Mini Kossel Delta