New! Checkout the AzureFilm filament range. You wont be disappointed!

Get In Touch

Fill in your details below and click 'Submit'

iglidur® I150-PF 3D Printing Filament 2.85mm 750gms

iglidur® I150-PF 3D Printing Filament 2.85mm 750gms

Product Code: IG-1150-175-750-285
  • Filament Brand: iglidur®
  • Filament Colour: White
  • Filament Weight: 750gms
  • Filament Diameter: 2.85mm
  • Shipping Notes: Ready for shipping in 2-3 working days
High quality food compliant 3D printing filament from Igus. Low friction. High strength.
£86.40 Inc Vat
£72.00 Exc Vat


  • Availability: In Stock
  • You will earn 86 loyalty points with this purchase worth £0.86 that you can use on this order.

    More Details

    3D printer filament: iglidur® |150-PF

    Components made of igus® Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological
    properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus® Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required.  

    Typical application areas:
    • Special machine construction
    • Jig construction
    • Complex wear parts
    Tribological 3D Printing Filament
    Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication and wear.  Tribology is particularly important in today's world because so much energy is lost to friction in mechanical components. To use less energy, we need to minimize the amount that is wasted. Significant energy is lost due to friction in sliding interfaces.
    • Food compliant
    • tribo-filament that is easiest to process 
    • High abrasion resistance at low surface speeds 
    • Good mechanical coefficients 
    • Cost-effective
    • Compliant with EU Regulation 10/2011
    ​​Flexural strength: 54 MPa

    You can print on a warm printer platform around 50c, using the wonderful 3DLac platform adhesive.

    For a comprehensive overview of the Tribology filament specifications and tests view here.

    General Properties



    Material suitable for


    Max. moisture absorption (at 23 °C/73 °F, 50% r.h.)

    0.3 Wt.-%, test method DIN 53495

    Max. water absorption

    0.7 Wt.-%

    Net weight

    250 g

    Flexural strength

    54 MPa

    Physical and thermal properties

    Max. long-term application temperature

    65 °C

    Max. short-term application temperature

    75 °C

    Lower application temperature

    -30 °C

    Max. recommended surface pressure (at +20 °C/68 °F)

    24 MPa


    Mould-free according to DIN EN ISA 846 Procedure A


    Processing instructions

    Nozzle temperature (min.)

    240 °C

    Nozzle temperature (max.)

    250 °C

    Bed temperature (min.)

    20 °C

    Bed temperature (max.)

    60 °C

    Recommended adhesion

    igus® adhesive film or glue stick on glass (Adhesive film imperative with non-heated pressure bed)

    Construction space

    No closed installation space necessary

    Component cooling

    A component cooling is not necessary, with cooling switched on it is also possible to print