Igus® 3D Printing Filaments

Home / Filaments / By Brand / Igus® 3D Printing Filaments / iglidur® I180-BL-PF 3D Printing Filament 1.75mm 750gms Black

iglidur® I180-BL-PF 3D Printing Filament 1.75mm 750gms Black

Name: iglidur® I180-BL-PF 3D Printing Filament 1.75mm 750gms Black
Brand: igus®
SKU: IG-1180-175-750
Price: 94.80 GBP
Availability: InStock

iglidur® I180-BL-PF 3D Printing Filament 1.75mm 750gms Black

£79.00 £94.80 (inc. VAT)

Stock Status: In Stock

Versatile use: good combination of high wear resistance, strength and temperature resistant filament

You Will Earn 94 points with this purchase

Make 6 weekly payments of £15.80.

Interest free. Learn More

Information Specifications Reviews

3D printer filament: iglidur® |180-BL-PF

Components made of igus® Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological
properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus® Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required. 　

Typical application areas:

Special machine construction
Jig construction
Complex wear parts

Tribological 3D Printing Filament
Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication and wear. Tribology is particularly important in today's world because so much energy is lost to friction in mechanical components. To use less energy, we need to minimize the amount that is wasted. Significant energy is lost due to friction in sliding interfaces.

Iglidur I180

iglidur® I180 combines very high wear resistance with the highest strength of the iglidur® tribo-filaments
Easier to process than iglidur® I170 and iglidur® J260
Processable on 3D Desktop printers, where standard ABS filaments are used
Upon the processing the printer must be enclosed in a case and te cooling fan must be off
Flexural strength: 46 / 33 MPa
Versatile use: good combination of high wear resistance, strength and temperature resistance
Good processing ability with an enclosed printer and igus adhesive film

Colour black

For a comprehensive overview of the Tribology filament specifications and tests view here.

Tested strength when compared to machined and injection-moulded parts
Up to 50 x higher abrasion resistance

Test parameters - wear test swivelling

Surface pressure: 1MPa

Surface speed: 0.01m/s

Pivoting angle: 60°

Duration: four weeks

Shaft materials: CF53 and 304 SS

Test result:
the pivot test shows that the abrasion resistance of the iglidur® filament is up to 50 times higher than the standard 3D printing materials (e.g. ABS).

General properties

Colour	black
Material suitable for	Beginner
Max. moisture absorption (at 23 °C/73 °F, 50% r.h.)	0.3 Wt.-%, test method DIN 53495
Max. water absorption	0.9 Wt.-%
Net weight	250 g
Coefficient of sliding friction, dynamic, against Cf53 steel	0.25
Coefficient of sliding friction, dynamic, against 304 stainless steel	0.21
pv value, max. (dry)	0.23 MPa ⋅ m/s
Flexural strength	46 / 33 MPa

Physical and thermal properties

Max. long-term application temperature	80 °C
Max. short-term application temperature	90 °C
Lower application temperature	-40 °C
Thermal expansion coefficient (at 23°C/73°F)	9 K^-1 ⋅ 10^-5, test method DIN 53752
Heat conductivity	0.23 W/(m ⋅ K), test method ASTM C 177
Pressure load	59 MPa
Max. recommended surface pressure (at +20 °C/68 °F)	30 MPa

Requirements

Mould-free according to DIN EN ISA 846 Procedure A

Processing instructions

Nozzle temperature (min.)	250 °C
Nozzle temperature (max.)	260 °C
Bed temperature (min.)	90 °C
Bed temperature (max.)	110 °C
Recommended adhesion	igus® adhesive film
Construction space	Closed installation space necessary
Component cooling	A component cooling is not necessary, with cooling switched on it is also possible to print

Filament Brand:

iglidur®

Filament Colour:

Black

Filament Weight:

750gms

Filament Diameter:

1.75mm

Shipping Notes:

Ready for shipping in 2-3 working days

Brand:

igus®

Condition:

New

Product Code:

IG-1180-175-750

Weight:

0.75kg

Customer reviews

No reviews left yet

Write a review

No reviews have been left for this product, be the first to leave a review

Igus® 3D Printing Filaments

iglidur® I180-BL-PF 3D Printing Filament 1.75mm 750gms Black

iglidur® I180-BL-PF 3D Printing Filament 1.75mm 750gms Black

Customer reviews

Related Products