If you need a spool holder for this product you can either download and 3D print your own from here https://www.thingiverse.com/thing:39564 or add one to your order during your spool selection of which we have already printed for you at just £3.50 per holder.
MOLDLAY is a wax-like thermoplastic 3D Printer Filament which can be used to cast a variety of materials. It is extremely stable dimensionally, and remains rigid at room temperature.
- Near zero warping
- Can be printed without a heated bed
- Prints at temperatures of 175 – 185° C
- Molds must be treated at ~ 270°C in an old baking oven
Users of MOLDLAY simply design and print out the item they wish to create via a mold. Once printed with the new filament, the object must then be surrounded by concrete, which is allowed to then harden. Once the concrete is hardened, the block must be placed into an oven at approximately 270° C. This will melt the MOLDLAY within the concrete, as the wax-like substance flows out of the mold like hot paraffin wax. This leaves a near-perfect mold within the concrete block, which can then be filled with molten tin or brass. Once cooled, it’s now time to break the mold and retrieve the object within, which should be a close copy to that which was initially printed with the MOLDLAY filament. The only difference is that it’s metal instead of wax-like. There may be some concrete which remains attached to the metal object. This can be removed by soaking the object in citric acid over night.
Thanks to 3Dprint.com for use of the above text.