Get In Touch

Fill in your details below and click 'Submit'

Member of
  
All prices include FREE UK delivery
Nylon 645 3mm 5 Metre Wrap

Nylon 645 3mm 5 Metre Wrap

Product Code: TAU-645-3-5MTR
  • Filament Brand: Taulman 3D
  • Filament Colour: Clear
  • Filament Diameter: 3mm
  • Filament Length: 5 Metres
£3.95 Inc Vat
£3.29 Exc Vat

Quantity

  • Availability: In Stock
  • You will earn 3 loyalty points with this purchase worth £0.03 that you can use on this order.

    More Details

    We would like to thank the team at taulman 3D for allowing us to cooperate with them on selling this beautiful, soft as a butterfly wing, yet stronger than ABS or PLA filament.  As with all our filaments, we are of the opinion that 3D printing filaments should be affordable enough for you to be able to try a product without breaking the bank, especially when the item is as good as the Nylon 645.

    645 print

    Nylon can also be dyed to the colour of your choice and here is  a link to the most comprehensive, informative and professional blog on how to colour nylon over at the richrap blogspot.

    This is a 5 Metre wrap of Nylon 645 3mm

    Taulman 645 Technical Specifications:

    Type = 645 Nylon Co-Polymer consists of the purest form of a delta transition of Nylon 6/9, Nylon 6 and Nylon 6T with a crystallinity optimization process in addition to post processing for maximum bonding during a thermal transition (3D Printing).
    Construction = From granule form through nylon extruding systems to a 12 station extrusion to draw, 4 chiller loops with 2 post processing stations to a final draw of 3mm or 1.75mm round line.

    Physical Properties
    Water Absorption      3.09 %  3.09 %  ISO METHOD 62

    Mechanical Properties
    Tensile Strength, Yield  71.0 MPa  1242 psi  ISO METHOD 527
    Elongation at Break  >= 300 %  >= 300 %  ISO METHOD 527

    Thermal Properties
    Melting Point  214 °C  417 °F  ISO METHOD 3146C
    Glass Transition Temp  68.2°C.

    Processing Properties
    Print Temperature  235 – 260 °C – Part and printer dependent.
    Pyrolysis  350 – 360 °C
    There are no UV Inhibitors within 645 as they reduce bonding

    Safety

    645 meets the EU’s “REACH” requirements as defined by the ECHA European Chemicals Agency.  There are NO additives or chemicals in 645 that are listed in the REACH Directive.

    645 Contains NO toxic chemicals and is “inert” to the body.

    As with all 3D Printing using heated polymers, Caution should be used so as NOT to come into contact with the molten 645 (214C+) as it will adhere to ALL cellulose surfaces, including skin.


    Medical Applications and usage/settings:


    Applications:

    1. Bone repair and replacements – US Clinic Evaluations

    2. Real-time build of custom prosthetic – Hague University of applied sciences Department: Technology, Innovation & Society

    3. Real-time build of custom orthopaedic items. – Hague University of applied sciences Department: Technology, Innovation & Society

    4. Real-time build of custom prosthetic with internal sensors – Sensors installed during the active printing process. – Hague University of applied sciences Department: Technology, Innovation & Society

    5. Real-time build of custom pressure sensing braces and prosthetic. – US Clinic Evaluations

    6. Build of custom bone replacement with targeted support prosthetic. – Hague University of applied sciences Department: Technology, Innovation & Society

    7. Custom heavy support fabric/film for less restrictive outpatient activity. – Hague University of applied sciences Department: Technology, Innovation & Society

    Usage:

    Bone:

    1.  Refer to the “Maximum layer bonding Page” to set your printer for best layer bonding.

    2. As 645 is an extremely strong material, it is still important to build the replacement in such a fashion to maximize resistance to stress.

    The greatest strength is always along the nozzle flow axis.  As newer printers and older printers with updated SW can provide a form of rafting or

    support for high print angles, it is better to plan a print with support to obtain the best structural and slippery features.

    Settings:

    Current feedback from actual usage shows a better end replacement when printed with the following settings:

    1. Perimeters  = Minimum of 4 – Maximum depends on the number of screws used to attach to existing structure.

    2. Layer thickness/height = .1mm maximum for small joints and .04mm for larger joints.

    3. Temperature = From “Maximum layer bonding Page” determination.

    4. Speed = Printer dependent, however speeds greater than 44mm/s begin to reduce bonding on some nozzles.

    5. Perimeter Speed = This should be the slowest of all your print speed settings. – Some reports @ 22-24mm/s

    6. Nozzles:  0.23mm – 0.5mm – Brass with flat tip   0.5mm -  1.0mm  – Brass, Copper, Copper Alloy with domed tip

    Aluminum was not preferred in a nozzle.  (This is as a function of material.  High TS was not tried)

    7. Retraction – 5-6mm with 1.75mm 645 and 4-5mm with 3mm 645
    NOTE:  Other than making sure the idler pressure on extruders was tight, retraction seems to be the only other setting required when changing from ABS/PLA to 645

    8. Skirt – Minimum of 4 @ 1 layer height. – Due to 645′s viscosity, it will take 645 longer to equalize 1st layer pressure in the nozzle than ABS/PLA

    9. Bonding surface:

    Precision Bond = Machinable Garolite (LE) McMaster Carr PN 8474K141, 8474K151, 8474K161, 8474K171
    Warning: Keep surface area to the Garolite at a minimum or you will break your part trying to remove it.

    Secure Bond = Cast Nylon block/sheet

    Secure Bond = 645 printed block/sheet

    Nylon Raft – using a 50% fill cross section with exposed fill crosshatch

    3/8″ sheet of Poplar Wood – unfinished – 645 like other nylons bonds well to cellulose fibers.

    Printed Circuit Board – Hobby Style with no copper, just holes spaced at 0.100 centers

    Various Masking/Painting tapes as 645 will stick to the wax backing of these tapes.

    More information is provided here http://taulman3d.com/645-features.html