Fill in your details below and click 'Submit'
You can read a thorough review of the Polymaker PolyFlex™ by Ian Hiscock by clicking the PDF icon below.Flexible : PolyFlex™ features a “Shore A” hardness of 90-95A and a large strain-to-failure of over 400%. These aren’t just figures on a page, but are tested values obtained from actual printed parts. What this means is that PolyFlex™ gives you cool flexible parts with no worry about the part breaking. PolyFlex™ is truly your best tool for creating fun flexible parts.
Printer Compatibility: One of our main goals when developing PolyFlex™ was to make it easy for everyone to use. Flexible filaments are known to be difficult to work with. Well not any more. PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.
Flex-up Your Imagination : The soft and flexible nature of PolyFlex™ opens up a new dimension of what one can do with desktop 3D printers, clothing, shoes, wearables, prosthetics…you name it. The possibilities are endless.
Glass Transition Temp
N/A
Filament Melting Point
200 – 210 °C (392 – 410 °F)
Density
1.17 – 1.24 g/cm3
Diameters
1.75 mm or 3 mm
Tolerance
± 0.05 mm
50 Microns
(Typical~ 0.02 mm )
View a video of the properties of PolyFlex here.
The 750gms spool of filament is delivered to you FREE OF CHARGE (within the UK) in a vacuumed sealed, silver lined plastic bag, complete with a sachet of silica gel.
Printing temperature between 180C and 220C.
Platform at a temperature of 50C with 3M Blue Painters Tape
Visit here for more information